APC Smart-UPS VT 20kVA ups specifications

• Output power capacity: 16.0 KWatts / 20.0 kVA
• Max Configurable Power (Watts): 16.0 KWatts / 20.0 kVA
• Nominal Output Voltage: 400V 3PH
• Output Voltage Note: Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
• Efficiency at Full Load: 95.3 %
• Output Voltage Distortion: Less than 5% at full load
• Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal
• Output Frequency (not synced): 50Hz +/- 0.1% for 50Hz nominal
• Other Output Voltages: 380, 415
• Load Crest Factor: 3 : 1
• Topology: Double Conversion Online
• Waveform type: Sine wave
• Maximum Output Current: 32
• Bypass: Built-in Maintenance Bypass, Built-in Static Bypass
• Nominal Input Voltage: 400V 3PH
• Input frequency: 40 – 70 Hz (auto sensing)
• Input Connections: Hard Wire 5-wire (3PH + N + G)
• Input voltage range for main operations: 304 – 477V
• Efficiency at Full Load: 95.3 %
• Other Input Voltages: 380, 415
• Maximum Input Current: 27.0A
• Input Power Factor at Full Load: 0.98
• Battery type: VRLA
• Included Battery Modules: 4
• Typical recharge time: 5hour(s)
• Nominal Battery Voltage: +/-192 V (split battery referenced to neutral)
• Expected Battery Life (years): 3 – 5
• RBC Quantity: 4
• Extendable Run Time: 1
• Interface Port(s): DB-9 RS-232 , Smart-Slot
• Pre-Installed SmartSlot™ Cards: AP9631
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Audible and visible alarms prioritized by severity
• Emergency Power Off (EPO): Yes