APC Smart-UPS RT 1000VA 1kva 230V SURT1000XLI
SURT1000XLI Features
APC Smart-UPS RT 1000VA 230V
High-density, double-conversion on-line power protection with scalable runtime
Includes: CD with software, Smart UPS signaling RS-232 cable, User Manual
Smart-UPS On-Line Features & Benefits
Serviceability
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
-
Predictive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
-
Disconnected battery notificationWarns when a battery is not available to provide backup power.
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
Adaptability
-
Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
-
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.
-
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.
Manageability
-
LED status indicatorsQuickly understand unit and power status with visual indicators.
-
Serial connectivityProvides management of the UPS via a serial port.
-
Network manageableProvides remote power management of the UPS over the network.
-
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
-
SmartSlotCustomize UPS capabilities with management cards.
Protection
-
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
-
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
-
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
-
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Availability
-
Scalable runtimeAllows additional run time to be quickly added as needed.
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
-
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
Marketing Features
-
Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature-compensated charging. Automatic self-tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy-to-connect, hot-swappable battery modules provide battery replacement without powering down.
-
Save time with easy and convenient remote/network accessibility.Network manageable via serial, USB, or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
-
Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
-
Avoids costly power problems by keeping your IT equipment and data protected and available.Network-grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to the battery during power events.
Print Technical Specification
Output
-
Output power capacity
700Watts / 1.0 kVA
-
Max Configurable Power (Watts)
700Watts / 1.0 kVA
-
Nominal Output Voltage
230V
-
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
-
Output Voltage Distortion
Less than 3%
-
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
-
Other Output Voltages
220, 240
-
Load Crest Factor
3: 1
-
Topology
Double Conversion Online
-
Waveform type
Sine wave
-
Output Connections(6) IEC 320 C13 (Battery Backup)(2) IEC Jumpers (Battery Backup)
-
Bypass
Built-in Bypass
Input
-
Nominal Input Voltage
230V
-
Input frequency
50/60 Hz +/- 5 Hz (auto sensing)
-
Input Connections
IEC-320 C14
-
Input voltage range for main operations
160 – 280V
-
Input voltage adjustable range for mains operation
100 – 280V
-
Number of Power Cords
1
-
Other Input Voltages
220, 240
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
-
Included Battery Modules
1
-
Typical recharge time
3hour(s)
-
Replacement Battery
RBC31
-
Expected Battery Life (years)
3 – 5
-
RBC Quantity
1
-
Extendable Run Time
1
-
Extended Run Options
APC-Smart-UPS-RT-1000VA-230V
-
RuntimeView Runtime Chart
-
Efficiency
Communications & Management
-
Interface Port(s)
DB-9 RS-232 , SmartSlot
-
Control panel
LED status display with load and battery bar-graphs and On Line: On Battery: Replace Battery: Overload and Bypass Indicators
-
Audible Alarm
Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
-
Emergency Power Off (EPO)
Optional
-
Available SmartSlot™ Interface Quantity
1
Surge Protection and Filtering
-
Surge energy rating
420Joules
-
Filtering
Full-time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449
Physical
-
Maximum Height
432mm, 43.2CM
-
Maximum Width
85mm, 8.5CM
-
Maximum Depth
483mm, 48.3CM
-
Rack Height
2U
-
Net Weight
23.0KG
-
Shipping weight
27.8KG
-
Shipping Height
286mm, 28.6CM
-
Shipping Width
630mm, 63.0CM
-
Shipping Depth
594mm, 59.4CM
-
Color
Black
-
Master Carton Units
1.0
-
Units per Pallet
6.0
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95% non-condensing %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-20 – 50 °C
-
Storage Relative Humidity
0 – 95% non-condensing %
-
Storage Elevation
0-15000meters
-
Audible noise at 1 meter from the surface of the unit
50.0dBA
-
Online thermal dissipation
324.0BTU/hr
-
Protection Class
IP 20
Conformance
-
Approvals
C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, VDE
-
Standard warranty
2 years repair or replacement, optional on-site warranties available, optional extended warranties available
Be the first to review “APC Smart-UPS RT 1000VA 1kva 230V SURT1000XLI”
Related products
KSh51,000.00 Ex.VAT
KSh200,000.00 Ex.VAT
KSh140,000.00 Ex.VAT
KSh245,000.00 Ex.VAT
KSh1,140,000.00 Ex.VAT
APC UPS
KSh2,200.00 Ex.VAT
KSh102,000.00 Ex.VAT
KSh25,000.00 Ex.VAT
Reviews
There are no reviews yet.