• Battery modules connected in parallel
  Delivers higher availability through redundant batteries.
• Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.
• Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
• Generator compatible
  Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Scalable runtime
  Allows additional run time to be quickly added as needed.

• Programmable frequency
  Ensures compatibility with different input frequencies.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• LCD display
  Alpha-Numeric Display which displays system parameters and alarms.
• SmartSlot
  Customize UPS capabilities with management cards.
• InfraStruXure Manager Compatible
  Enables centralized management via the APC InfraStruXure Manager.
• Network manageable
  Provides remote power management of the UPS over the network.
• LED status indicators
  Quickly understand unit and power status with visual indicators.

• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.

• EU CoC for UPS
  Ensures that UPSs sold in the EU are highly efficient

• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
• Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
• Scalable runtime
  Allows additional run time to be quickly added as needed.
• Network manageable
  Provides remote power management of the UPS over the network.
• Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.

• Modular design
  Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
• Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Shippable with modules installed
  Enables pre-installation UPS staging and testing and faster installation.

40kva UPS Battery Backup specifications

Output

• Output Power Capacity: 32.0 KW / 40.0 kVA
• Max Configurable Power (Watts): 32.0 KW / 40.0 kVA
• Nominal Output Voltage: 400V 3PH
• Output Voltage Note: Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
• Efficiency at Full Load: 95.8 %
• Output Voltage Distortion: Less than 5% at full load
• Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal
• Output Frequency (not synced): 50Hz +/- 0.1% for 50Hz nominal
• Other Output Voltages: 380, 415
• Crest Factor: 3 : 1
• Topology: Double Conversion Online
• Waveform Type: Sine wave
• Maximum Output Current: 64
• Bypass: Built-in Maintenance Bypass, Built-in Static Bypass

Input

• Nominal Input Voltage: 400V 3PH
• Input Frequency: 40- 70 Hz (auto sensing)
• Input Connections: Hard Wire 5-wire (3PH + N + G)
• Input voltage range for main operations: 304 – 477 V
• Other Input Voltages: 380 , 415
• Efficiency at Full Load: 95.8 %
• Maximum Input Current: 55 A
• Input Power Factor at Full Load: 0.98

Batteries & Runtime

• Battery Type: VRLA
• Included Battery Modules: 4
• Typical recharge time: 5 hour(s)
• Nominal Battery Voltage: +/-192 V (split battery referenced to neutral)
• Expected Battery Life (years): 3 – 5
• RBC Quantity: 4
• Extendable Run Time: 1
• End of Discharge Battery Voltage: +/-154 V

Communications & Management

• Interface Port(s): DB-9 RS-232, Smart-Slot
• Pre-Installed SmartSlot™ Cards: AP9631
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Audible and visible alarms prioritized by severity
• Emergency Power Off (EPO): Yes

Physical

• Maximum Height: 1490.0 mm
• Maximum Width: 523.0 mm
• Maximum Depth: 842.0 mm
• Net Weight: 629.09kg